- No products in the basket.
- Fillite would be the recommended bulking agent for this -
- Either directly coat the mould, or mix with the first coat of resin. Another bulking agent can be used to increase the weight if needed.
- A general- purpose inert filler such as talc can be added in a 50: 50 ratio
- NO, the pigments are dispersed in the correct base for each type of product, results can not be guaranteed or even expected if the wrong type is utilised -
- Silicone - up to 10% maximum Polyester - up to 5% maximum Polyurethane - up to 5% maximum Latex - up to 5 % maximum -
