- No products in the basket.
-
Details
PM87 A/B
PU – 85 -90 Shore A elastomer for Master patterns.General purpose casting applications where long pot-life, low shrinkage and insensitivity to moisture are required. Low sensitivity to moisture during curing. (Easily pigmentable)
Supplied in 30.6 kg kits £Price on application
-
Details
PC25 & G226
- PU Rigid, (Unfilled) 1/1 ratio White in appearance.
- Offering good machinability. Used in Foundry patterns, demonstrative prototypes.
- Aluminium Tri-Hydrate Filler can be added at a 100A-100B-300Filler Ratio mix.
Supplied only in 36 kg kits £Price on application
(Tri-Hydrate Filler in 5 – 25 kg Drums)
-
Details
FC11 Parts A/B
- PU Rigid, Similar to FC10, but for larger section casting
- 1/1 by weight, Beige in colour. (unfilled)
- Both FC10 and FC11 can be filled with Aluminium Tri-Hydrate Filler. (see Fillers)
- Supplied in 10 kg kits £135.00
- Supplied in 50 kg kits £Price on application
-
Details
FC10 Part A/B —
- PU Rigid,
- Excellent mechanical strength 1/1 by weight,
- Beige in colour. 5 minutes working time (Unfilled)
Used for casting requiring high impact strength, Rapid prototyping and fine detail casting.
- Supplied as 2kg kits £28.00
- Supplied as 10 kg kits £121.50
- Supplied as 50 kg kits £Price on application
-
Details
J-Cast 70D is a two part quick curing polyurethane casting system curing at room temperature to a rigid tough material.
- Quick Curing
- 50 : 50 mixing
- Low viscosity
- Low shrinkage
- Precise reproduction
Applications Specially developed for use in silicone rubber mouldings. For the rapid production of models and prototypes.
-
Details
J Foam 5216 A/B — Low density rigid (rigid) suited to filling voids or making light-weight castings. Sometimes termed biscuit foam. (Natural colour)
Packaging- 2 kg
- 10 kg
- 40 kg.
J Foam 5216 A/B
2kg kit = £27.50 each
10kg kit = £91.00 each
Price for 40 kg kits £POANote: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
-
Details
J Foam 7059 A/B — Medium density (rigid) foam suitable for the production of Prototypes and Models. Forms a good skin under pressure. (Natural colour)
Packaging
- 2 kg
- 10 kg
- 40 kg.
2kg kit = £27.50 each
10kg kit = £99.00 each
Price for 40 kg kits A/B £POA
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
