2 kg Kit

View as grid list

  • Jaconson Chemicals
    QUICKVIEW

    PM87 A/B

    PM87 A/B
    PU  – 85 -90 Shore A elastomer for Master patterns.

    General purpose casting applications where long pot-life, low shrinkage and insensitivity to moisture are required. Low sensitivity to moisture during curing. (Easily pigmentable)

    Supplied in 30.6 kg kits £Price on application

    Details
  • Jaconson Chemicals
    QUICKVIEW

    PC25 & G226

    PC25 & G226

    • PU Rigid, (Unfilled) 1/1 ratio White in appearance.
    • Offering good machinability. Used in Foundry patterns, demonstrative prototypes.
    • Aluminium Tri-Hydrate Filler can be added at a 100A-100B-300Filler Ratio mix.

    Supplied only in 36 kg kits  £Price on application

    (Tri-Hydrate Filler in 5 – 25 kg Drums)

    Details
  • FC 11 PolyurethaneFC 11 PolyurethaneOut of Stock!
    QUICKVIEW

    FC11 Parts A/B

    FC11 Parts A/B

    • PU Rigid, Similar to FC10, but for larger section casting
    • 1/1 by weight, Beige in colour. (unfilled)
    • Both FC10 and FC11 can be filled with Aluminium Tri-Hydrate Filler. (see Fillers)

     

    • Supplied in 10 kg kits £Price on Application
    • Supplied in 50 kg kits £Price on application
    Details
  • FC10 Part A/BFC10 Part A/B
    QUICKVIEW

    FC10 Part A/B

    FC10 Part A/B  —

    • PU Rigid,
    • Excellent mechanical strength 1/1 by weight,
    • Beige in colour. 5 minutes working time (Unfilled)

    Used for casting requiring high impact strength, Rapid prototyping and fine detail casting.

    • Supplied as 2kg kits £34.00
    • Supplied as 10 kg kits £148.50
    • Supplied as 50 kg kits £Price on application
    Details
  • J Cast 70D Parts A&BJ Cast 70D Parts A&B
    QUICKVIEW

    J Cast 70D Parts A&B

    J-Cast 70D is a two part quick curing polyurethane casting system curing at room temperature to a rigid tough material.

    • Quick Curing
    • 50 : 50 mixing
    • Low viscosity
    • Low shrinkage
    • Precise reproduction

    Applications Specially developed for use in silicone rubber mouldings. For the rapid production of models and prototypes.

     

     £ – please contact the office for details 

    Details
  • J Foam 5216J Foam 5216
    QUICKVIEW

    J-Foam 5216 A+B Kit

    J Foam 5216 A/B — Low density rigid (rigid) suited to filling voids or making light-weight castings. Sometimes termed biscuit foam. (Natural colour)
    Packaging

    • 2 kg
    • 10 kg
    • 40 kg.

    J Foam 5216 A/B

    2kg kit  = £27.50 each
    10kg kit   = £91.00 each
    Price for 40 kg kits £POA

    Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.

     

    Details
  • j Foam 7059j Foam 7059Out of Stock!
    QUICKVIEW

    J Foam 7059 Parts A&B Kit

    J Foam 7059 A/B — Medium density (rigid) foam suitable for the production of Prototypes and Models. Forms a good skin under pressure. (Natural colour)

    Packaging

    •  2 kg
    •  10 kg
    •  40 kg.
      2kg kit = £27.50 each
      10kg kit  = £99.00 each
      Price for 40 kg kits A/B £POA

    Polyurethane foam systems — (J Foam range)

    Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
    Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.

    Details