- No products in the basket.
-
Details
Epoxy Casting System: EC-2404 Epoxy casting systems is easily workable, has a good chemical resistance., High-Temperature resistance when filed and Room temperature hardening and de-mouldable
Key Properties –
- High Temperature resistance – Filled
- Room temperature hardening and de-mouldable
- Easily workable
- Good chemical resistance
Applications-
- Vacuum forming moulds
- Jigs
- Injection moulds
- Foam baking mould tools
Pack sizes & prices –
1.150 kg £36.00 each
2.300 kg £62.50 each
5.750 kg £140.00 eachPlease refer to the technical sheets for the full mechanical properties and temperature resistance.
-
Details
Norsodyne Clear casting resin O12335 is a Polyester based water clear casting resin, ideally suited for larger casting up to 500 grams.
1820 Can be used for a number of applications, to produce a water clear cast.
Applications–
- Potting
- Embedding
- Paperweights
- Decorative items
- Water effects
- Giftware
Pack sizes & prices –
1 kg packs £14.50 each
5 kg packs £49.00 each
25 kg kegs / Price on application – Please contact us directly on 01420 86934Please refer to the technical sheets for the full mechanical properties & mixing instructions
(This material contains Styrene) uses liquid catalyst MEKP at 1-2%, please refer to the Material Safety Data Sheets for all of your requires on using these materials. -
Details
PU Release agent is good mould release for Polyurethanes.
PU Release aresol agent, is based on resin providing a excellent thermal stability giving a nice surface condition to the parts.
PU Release will considerably increase the life of the moulds, as it offers protection against chemical attack (Packaging: Aerosol 400 ml)
-
Details
PLASTICRETE P-CAST A02 is a water based acrylic resin that reacts with the special filler forming a solid mass.
The Plasticrete systems hardens at room temperature and in a short time the material reaches mechanical properties much higher than the normal gypsum based products.
50% of the final Plasticrete mechanical performances are obtained after 15 hours at 20°C only. The cured product has a limited porosity and low water absorption.
Plasticrete Application:
Plasticrete can be used for small or large size architectural elements, flame resistant, low or high density, sculptures reproduction. -
Details
Prosthetic Silicones Softening Agent XP684 Softens without a dramatic or drastic increase in bleeding rates can be up to 150% plus
- 1kg @ £22.00 per kg
- 5kg @ £19.00 per kg
- 10kg @ £18.00 per kg
- 22.67kg (50lb) @ £17.00 per kg
-
Details
Prosthetic Silicones Cling-on agent (Softens with tacky finish) aiding adhesion.
Using this you will experience a softening as well as a sticky effect, enhancing the tendency
for the prosthesis to adhere to skin.- 1kg @ £24.00 per kg
- 5kg @ £23.00 per kg
- 10kg @ £22.00 per kg
- 18.14kg (40lb) @ £21.00 per kg
-
Details
Product Prosthetic Silicones XP740 A / B STANDARD CURE SYSTEM
A 1:1 platinum catalysed system shore OO hardness 70-75, translucent designed to be used in special effects applications and medical simulators. Additives can be introduced to further reduce hardness and/or create tactile adhesion.
- 1kg kit (500gms A / 500gms B) @ £22.00 per kg
- 2kg kit (1kg A / 1kg B) @ £18.00 per kg
- 10kg kit (5kg A / 5kg B) @ £16.00 per kg
- 36.28kg (80lb) kit (18.14kg Part A / 18.14kg Part B) @ £15.50 per kg
-
Details
Prosthetic Silicones P656 A/B (50:50 MIX) STANDARD AND QUICK CURE SYTEMS
A 1: 1 platinum catalysed system shore A hardness ‘9’, translucent designed to be used in special effects. Additives can be introduced to decrease hardness and/or create tactile adhesion.- 1kg kit (500gms A / 500gms B) @ £22.00 per kg
- 2kg kit (1kg A / 1kg B) @ £18.00 per kg
- 10kg kit (5kg A / 5kg B) @ £16.00 per kg
- 36.28kg (80lb) kit (18.14kg Part A / 18.14kg Part B) @ £15.50 per kg
-
Details
Blue Protective FG – Coloured corrosion protection
Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations.
Colored corrosion protection of moulds during storage.Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations. Can be used in cosmetic, pharmaceutical and food industries.
NSF Approved H2 N°140207. -
Details
Sansil DM7 -Paintable mould release agent
SANSIL DM 7 is a specialist mould release agent based on a unique, active material that has been formulated to provide improved release characteristics (compared to conventional non-silicone release agents) on a wide range of thermoplastic and thermoset materials, whilst still allowing post moulding operations to be carried out.
-
Details
Sansil SF 772 PA – Mould release agent for plastics. Silicone free. Colourless film. Temperature resistance up to 200 °C.
-
Details
Sansil Ecoprotect – Corrosion protection of moulds during storage.
Sansil Ecoprotect provides corrosion protection of moulds during storage. Transparent wax film. With Sansil Ecoprotect it avoids the need to clean during the first moulding operations.
-
Details
Sansil AB – Cleaner for injection mould tools
Sansil AB is a Cleaner for injection mould tools. The Sansil AB Product can be used hot or cold. Allow to act for a few minutes depending on soil nature to remove.
-
Details
R20 – Paintable mould release agent
R20 – Paintable mould release agent for plastics and rubbers allowing post-finishing operations. R20 is suitable for plastics and rubbers to be painted, lithographed, bonded, thermo welded after moulding. Colourless film.
R20 mould release agent is temperature resistance up to 150°C.
-
Details
Robsil Luborsil – Mould release agent
Robsil Luborsil Mould release agent for plastics and rubbers.
Based on silicone oil. Colourless film.
Temperature resistance up to 220 °C.. -
Details
Power Stick high strength
Power Stick is a permanent, high strength multipurpose adhesive. Non chlorinated. Long open time for convenient positioning.
Power stick High strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. Power Stick will provide high-strength bonds in many different areas : chipboard and concrete, insulation materials, leather, paper, wood, metal, plastic and rubber.
Directions: Apply Power Stick on both sides, allow solvents to evaporate for some minutes, then press parts together.
-
Details
Silicone Spray Lubricates and protects.
Silicone Spray Lubricates and protects. using thin clear protective film which resists wide temperature ranges (from -40°C to +200°C).
High quality lubricant for fitting of parts of different materials. Odorless and long lasting. Non-conductive.Directions: Spray Silicone Spray generously on surfaces to be treated. Repeat application at regular intervals, depending on environmental circumstances.
-
Details
Penetrating Oil + MoS2 Lubricates and frees seized and rusted metal parts (bolts, screws). Reduces wear; facilitates future dismantling.
- Penetrating Oil + MoS2 Frees and lubricates seized mechanisms.
- Penetrating Oil + MoS2 quickly penetrates through oxides and soil.
- Penetrating Oil + MoS2 Attacks rust and corrosion.Penetrating Oil Frees seized and rusted bolts, nuts and other metal components. Leaves a lubricating MoS2 film.
Directions: Spray Penetrating Oil liberally and wait a few minutes to allow the liquid to penetrate. Repeat if necessary.
-
Details
Precision Cleaner 300 ML– Removes grease, oil, dust. Leaves no residue. Compatible with most current materials.
Precision Cleaner can be used on plastics, test before application. May dissolve certainPrecision Cleaner Removes grease, oil, dust. Leaves no residue. Compatible with most current materials. For use on plastics, test before application. May dissolve certain adhesives.
-
Details
Quickleen – Solvent cleaner for service and repair is Fast and powerful cleaner.
- Quickleen Cleans and degreases all metal parts,
- Quickleen Cleans and degreases machines and tools.
- Quickleen Removes grease, oil and dirt.
Quickleen cleans and degreases all metal parts. Is aFast and powerful cleaner. Removes oil, brake fluid, grease, dirt and stains. Without chlorinated solvents.
Directions: Spray Quickleen liberally and allow to run off. Air dry or wipe off. If necessary, repeat application. Do not use Quickleen on plastics without prior testing.
-
Details
Aerosol 5-56 from CRC Industries,
- Aerosol 5-56 Penetrates –
- Aerosol 5-56 Displaces moisture –
- Aerosol 5-56 Lubricates –
- Aerosol 5-56 Protects
Aerosol 5-56 is a Multipurpose service spray.
Loosens rusted parts. Displaces moisture, enables to start wet engines, prevents electrical failure. Lubricates, stops squeaks and squeals, frees sticking mechanisms. Protects metals against humidity, corrosive atmosphere and prevents rust.
