- No products in the basket.
-
Details
Blue Protective FG – Coloured corrosion protection
Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations.
Colored corrosion protection of moulds during storage.Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations. Can be used in cosmetic, pharmaceutical and food industries.
NSF Approved H2 N°140207. -
Details
Sansil DM7 -Paintable mould release agent
SANSIL DM 7 is a specialist mould release agent based on a unique, active material that has been formulated to provide improved release characteristics (compared to conventional non-silicone release agents) on a wide range of thermoplastic and thermoset materials, whilst still allowing post moulding operations to be carried out.
-
Details
Sansil SF 772 PA – Mould release agent for plastics. Silicone free. Colourless film. Temperature resistance up to 200 °C.
-
Details
Sansil Ecoprotect – Corrosion protection of moulds during storage.
Sansil Ecoprotect provides corrosion protection of moulds during storage. Transparent wax film. With Sansil Ecoprotect it avoids the need to clean during the first moulding operations.
-
Details
Sansil AB – Cleaner for injection mould tools
Sansil AB is a Cleaner for injection mould tools. The Sansil AB Product can be used hot or cold. Allow to act for a few minutes depending on soil nature to remove.
-
Details
R20 – Paintable mould release agent
R20 – Paintable mould release agent for plastics and rubbers allowing post-finishing operations. R20 is suitable for plastics and rubbers to be painted, lithographed, bonded, thermo welded after moulding. Colourless film.
R20 mould release agent is temperature resistance up to 150°C.
-
Details
Robsil Luborsil – Mould release agent
Robsil Luborsil Mould release agent for plastics and rubbers.
Based on silicone oil. Colourless film.
Temperature resistance up to 220 °C.. -
Details
Power Stick high strength
Power Stick is a permanent, high strength multipurpose adhesive. Non chlorinated. Long open time for convenient positioning.
Power stick High strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. Power Stick will provide high-strength bonds in many different areas : chipboard and concrete, insulation materials, leather, paper, wood, metal, plastic and rubber.
Directions: Apply Power Stick on both sides, allow solvents to evaporate for some minutes, then press parts together.
-
Details
Silicone Spray Lubricates and protects.
Silicone Spray Lubricates and protects. using thin clear protective film which resists wide temperature ranges (from -40°C to +200°C).
High quality lubricant for fitting of parts of different materials. Odorless and long lasting. Non-conductive.Directions: Spray Silicone Spray generously on surfaces to be treated. Repeat application at regular intervals, depending on environmental circumstances.
-
Details
Penetrating Oil + MoS2 Lubricates and frees seized and rusted metal parts (bolts, screws). Reduces wear; facilitates future dismantling.
- Penetrating Oil + MoS2 Frees and lubricates seized mechanisms.
- Penetrating Oil + MoS2 quickly penetrates through oxides and soil.
- Penetrating Oil + MoS2 Attacks rust and corrosion.Penetrating Oil Frees seized and rusted bolts, nuts and other metal components. Leaves a lubricating MoS2 film.
Directions: Spray Penetrating Oil liberally and wait a few minutes to allow the liquid to penetrate. Repeat if necessary.
-
Details
Precision Cleaner 300 ML– Removes grease, oil, dust. Leaves no residue. Compatible with most current materials.
Precision Cleaner can be used on plastics, test before application. May dissolve certainPrecision Cleaner Removes grease, oil, dust. Leaves no residue. Compatible with most current materials. For use on plastics, test before application. May dissolve certain adhesives.
-
Details
Quickleen – Solvent cleaner for service and repair is Fast and powerful cleaner.
- Quickleen Cleans and degreases all metal parts,
- Quickleen Cleans and degreases machines and tools.
- Quickleen Removes grease, oil and dirt.
Quickleen cleans and degreases all metal parts. Is aFast and powerful cleaner. Removes oil, brake fluid, grease, dirt and stains. Without chlorinated solvents.
Directions: Spray Quickleen liberally and allow to run off. Air dry or wipe off. If necessary, repeat application. Do not use Quickleen on plastics without prior testing.
-
Details
Aerosol 5-56 from CRC Industries,
- Aerosol 5-56 Penetrates –
- Aerosol 5-56 Displaces moisture –
- Aerosol 5-56 Lubricates –
- Aerosol 5-56 Protects
Aerosol 5-56 is a Multipurpose service spray.
Loosens rusted parts. Displaces moisture, enables to start wet engines, prevents electrical failure. Lubricates, stops squeaks and squeals, frees sticking mechanisms. Protects metals against humidity, corrosive atmosphere and prevents rust. -
Details
Rost Flash – Rust loosener with freeze shock -Freezes and cracks rust!
1. Rust layer on a bolt.
2.When sprayed, the rust cools down (-40°C) and cracks, leaving small fissures.
3. Penetration of the active liquids.
4. Blocked parts are separated easily. Rost Flash loosens all kind of threaded parts, hinges and sliding parts.Rost Flash Free of silicones and acids.
Directions: Remove dirt, shake the can and Rost Flash spray liberally from a short distance.Allow the product to penetrate. Repeat action after 2 min. if needed.
-
Details
Copper Paste – High temperature lubrication. Protects against fretting, seizing and corrosion.
Copper paste is a Copper based anti-seize lubricant & protector.
Easy assembly and disassembly of all parts exposed to temperatures up to 1000 °C. Protects against burning in, corrosion and seizing. Prevents and stops disc brake noise and vibration.Directions: Use Copper Paste only on a clean and dry substrate. Do not mix with other lubricants.
-
Details
Marker Pen White – Multi surface Marker Pen
Marker Pens for multi surface use. Excellent coverage thanks to the use of correction fluid technology. Can be used on: wood, metal, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, …
Easy and clean application. Applications : For all markings in the industry.Directions: Shake Marker pen (White) well (with cap on) until the agitator ball moves. Press the tip several times or until the paint flows.
Replace the cap of the Marker pen (White) after use and store in horizontal position. Color fades when exposed to direct sunlight for an extended period. -
Details
Marker Pen Yellow – Multi surface Marker Pen
Marker Pens for multi surface use. Excellent coverage thanks to the use of correction fluid technology. Can be used on: wood, metal, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, …
Easy and clean application. Applications : For all markings in the industry.Directions: Shake Marker pen (Yellow) well (with cap on) until the agitator ball moves. Press the tip several times or until the paint flows.
Replace the cap of the Marker pen (Yellow) after use and store in horizontal position. Color fades when exposed to direct sunlight for an extended period.
