- No products in the basket.
J-Foam 5216 A+B Kit
J Foam 5216 A/B — Low density rigid (rigid) suited to filling voids or making light-weight castings. Sometimes termed biscuit foam. (Natural colour)
Packaging
- 2 kg
- 10 kg
- 40 kg.
J Foam 5216 A/B
2kg kit = £27.50 each
10kg kit = £91.00 each
Price for 40 kg kits £POA
Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
Product Documents
Product Description
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
J Foam 5216 A/B — Low density rigid (rigid) suited to filling voids or making light-weight castings. Sometimes termed biscuit foam. (Natural colour) Packaging 2 kg / 10 kg / 40 kg.
Related products
-
Details
Flexil RTV 20C base with either STD Green or FAST Yellow catalyst
Flexil RTV 20C is a two part silicone elastomer which cures at RT to a flexible 15 shore A material.
offered with 5% catalyst
- 1.05 kg £37.50 each
- 5.25 kg £126.00 each
- 21 kg kits ( £POA)
-
Details
J Foam 4087 A/B — Soft — Medium density (flexible) that will form a good skin under pressure, again to make light weight castings. (Natural colour)
- 8 kg
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department. -
Details
J-Cast 70D is a two part quick curing polyurethane casting system curing at room temperature to a rigid tough material.
- Quick Curing
- 50 : 50 mixing
- Low viscosity
- Low shrinkage
- Precise reproduction
Applications Specially developed for use in silicone rubber mouldings. For the rapid production of models and prototypes.
£ – please contact the office for details
