- No products in the basket.
Archive
Prosthetic range of Silicones – Jacobson Chemicals are pleased to have partnered with American manufacturer Silicones Inc
Jacobson Chemicals are pleased to have partnered with American manufacturer Silicones Inc., to distribute their Prosthetic range of Silicones. We are excited to introduce these additions to our range and look forward to demonstrating these quality products to you.
Grades we are now able to offer include XP656, and XP 740 1:1 platinum cure translucent silicones, designed specifically for use in special effects, which can be used in conjunction with varied additives to decrease hardness and/or tactile adhesion. XP 690Cling-on additive will soften and produce a sticky effect, enhancing adhesion for prosthetics, whilst XP684 Softener will increase softness, without a dramatic increase in bleeding.
Feb17
Charlie Cooper flourished as an artist
Charlie Cooper flourished as an artist whilst a student at TPS and was particularly enthused by 3D work.
He made some outstanding sculptures and was awarded an A* in his GCSE Art this summer. He has now used his skills working with fibre glass resin to produce a fabulous sculpture which is featured in the new Sculpture Garden next to the school’s Art block.
16 year-old Charlie now attends Alton College, studying a BTEC Extended Diploma in Art & Design, and is also working with Jacobson Chemicals Limited, a specialist chemical distributor supplying specialist materials to artists.Jacobson also play a major role in Charlie and younger brother Harvey supplying materials for the film industry.
Since completing this sculpture, Charlie has been busy sculpting similar sculptures for clients and is currently promoting himself as a young artist.
The project would not have been possible without Jacobson Chemicals and Nord Composites, who gave me free access to the materials used for the sculpture. Special thanks also to Mike Onslow, who is a local sculptor and mould maker. He was able to provide me with technical advice throughout the project, which was a great help to me. It was a fantastic project to be involved
See full Article Below
Feb08
Flexil S RTV J24 General Purpose Moulding Silicone
Flexil S RTV J24 General Purpose Moulding Silicone is Our best seller-
This two part condensation cure general purpose moulding silicone comes in 1.1kg, 5.5kg and 22kg kits, with a choice of Standard Aquamarine or Fast Turquoise catalyst at 10% to suit your working practises.
Flexil S RTV J24 has a shore A of 22-25 this is a very flexible rubber, easy to use, and with a coloured catalyst to ensure a smooth and even mix this is ideal for many types of mouldings. Flexil S RTV J24 can be used in conjunction with a thixotropic additive to produce either a flowable (paintable) viscous liquid, or a stiffer, more paste like rubber, for a “butter on” process, ensuring this is a truly multi-purpose moulding material.
Flexil S RTV J24 can be used in either skin moulds, block moulds, case moulds or thixo mouldings, Flexil S RTV J24 is a truly versatile product.
See Flexil S RTV J24 in our online shop
Nov24
PU Glass MR – two part polyurethane clear casting resin
PU Glass MR is a two part polyurethane clear casting resin is a totally clear and colourless system with superb UV resistance for long lasting clarity in finished items.
The PU Glass MR system is ideal for “glasslike” finishes in prototyping and models and can be coloured as required, with Polyurethane pigments. Supplied in packs of 1.65 kg, PU Glass MR is easy to mix and can be used for thin or thicker section pieces. Some heating maybe required when working with thin section pieces. Ideally use with silicone moulds for optimum clarity and finish.
PU Glass MR can be used to embed items to produce paperweight effects, and gives a hard, durable and non-flexible result.
Larger pack sizes of PU Glass MR are available on request.
Click here to see PU Glass MR product page
Nov10
Plastiline Modelling Compound
Plastiline Modelling Compound – Product Focus
Plastiline Modelling Compound is a wax based reusable modelling material, often used by sculptors in preference to clay based materials. It is non-drying and can also be melted and poured.
It is compatible with silicone moulding rubbers and also many resin composites, so is a very versatile choice for both hobby and industrial applications. Beloved of artists, Plastiline is available in two colours, Ivory and Grey and five different hardnesses, from very soft to very hard. Packed in a 5kg resealable tube.
Plastiline Modelling Compound can be fashioned by hand, or by tools and will retain its shape until reused.
-
Details
PLASTICRETE P-CAST A02 is a water based acrylic resin that reacts with the special filler forming a solid mass.
The Plasticrete systems hardens at room temperature and in a short time the material reaches mechanical properties much higher than the normal gypsum based products.
50% of the final Plasticrete mechanical performances are obtained after 15 hours at 20°C only. The cured product has a limited porosity and low water absorption.
Plasticrete Application:
Plasticrete can be used for small or large size architectural elements, flame resistant, low or high density, sculptures reproduction. -
Details
Plastiline 40 Grey very soft … compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardnesses
Plastiline: is a multi-purpose modelling wax available in 5 different grades and two colours, Ivory and Grey. Compatible with all silicone rubbers (Packaging 5 kg tubes)
Plastiline references — 40 very soft / 50 soft / 55 standard / 60 hard / 70 very hard (Grey or Ivory) colours
-
Details
Plastiline 50 A multi purpose soft wax-based modelling compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardnesses.
soft … compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardnesses
Plastiline: is a multi-purpose modelling wax available in 5 different grades and two colours, Ivory and Grey. Compatible with all silicone rubbers (Packaging 5 kg tubes)
Plastiline references — 40 very soft / 50 soft / 55 standard / 60 hard / 70 very hard (Grey or Ivory) colours
-
Details
Plastiline 55 Standard … compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardness’s
Plastiline: is a multi-purpose modelling wax available in 5 different grades and two colours, Ivory and Grey. Compatible with all silicone rubbers (Packaging 5 kg tubes)
Plastiline references — 40 very soft / 50 soft / 55 standard / 60 hard / 70 very hard (Grey or Ivory) colours
-
Details
Plastiline 60 Hard … compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardness’s
Plastiline: is a multi-purpose modelling wax available in 5 different grades and two colours, Ivory and Grey. Compatible with all silicone rubbers (Packaging 5 kg tubes)
Plastiline references — 40 very soft / 50 soft / 55 standard / 60 hard / 70 very hard (Grey or Ivory) colours
-
Details
Plastiline 70 Very Hard … compound, compatible with RTV silicones. Available in 5kg tubes in either grey or ivory, with a range of hardness’s
Plastiline: is a multi-purpose modelling wax available in 5 different grades and two colours, Ivory and Grey. Compatible with all silicone rubbers (Packaging 5 kg tubes)
Plastiline references — 40 very soft / 50 soft / 55 standard / 60 hard / 70 very hard (Grey or Ivory) colours
-
Details
Super Sculpey (Flesh Pink) 454 gms bar features
- Semi-translucent pink/beige sculpting compound suited to hand building methods.
- Bakes to a ceramic like finish.
- Has excellent tooling properties which make it perfect for prototypes for casting
-
Details
X-Wax (Oil-Free) is a modelling and sculpting wax primarily intended for producing masters prior to rubber skin casting.
X-wax is not intended for hardening by firing as it would melt under those circumstances.
X-wax is normally supplied in 1Kg ingot shapes, packed 5 to a box.
1 – 9 x 1 kg £7.50 each
10 – 99 x 1 kg £6.60 each
100+ £ Price on application
Oct01
CRC Industries appointed Jacobson Chemicals as a UK distributor
Jacobson’s are pleased to announce we have recently been appointed as a UK distributor for The Moulding range from CRC Industries.
CRC Industries Europe is a worldwide supplier of chemical products for the industry, automotive and electro segments. They manufacture and supply: cleaners, lubricants, anti-corrosion products, adhesives, welding products, additives, paints, moulding products and other speciality products. For the European, African and Middle East areas.
Jacobson Chemicals will stock a broad range of materials from the moulding range:
- Release agents (Robsil & Sansil) (Silicone and non-Silicone releases)
- Mould Protection
- Mould Cleaners
- Degreasers
- Lubricants
- Cleaners
- Adhesives
Please contact [email protected] or contact the sales office on 01420 86934 for more advice.
May28