-
Epoxy Casting System: EC-2404 Epoxy casting systems is easily workable, has a good chemical resistance., High-Temperature resistance when filed and Room temperature hardening and de-mouldable
Key Properties –
- High Temperature resistance – Filled
- Room temperature hardening and de-mouldable
- Easily workable
- Good chemical resistance
Applications-
- Vacuum forming moulds
- Jigs
- Injection moulds
- Foam baking mould tools
Pack sizes & prices –
1.150 kg £36.00 each
2.300 kg £62.50 each
5.750 kg £140.00 eachPlease refer to the technical sheets for the full mechanical properties and temperature resistance.
-
Prosthetic Silicones Softening Agent XP684 Softens without a dramatic or drastic increase in bleeding rates can be up to 150% plus
- 1kg @ £22.00 per kg
- 5kg @ £19.00 per kg
- 10kg @ £18.00 per kg
- 22.67kg (50lb) @ £17.00 per kg
-
Prosthetic Silicones Cling-on agent (Softens with tacky finish) aiding adhesion.
Using this you will experience a softening as well as a sticky effect, enhancing the tendency
for the prosthesis to adhere to skin.- 1kg @ £24.00 per kg
- 5kg @ £23.00 per kg
- 10kg @ £22.00 per kg
- 18.14kg (40lb) @ £21.00 per kg
-
Product Prosthetic Silicones XP740 A / B STANDARD CURE SYSTEM
A 1:1 platinum catalysed system shore OO hardness 70-75, translucent designed to be used in special effects applications and medical simulators. Additives can be introduced to further reduce hardness and/or create tactile adhesion.
- 1kg kit (500gms A / 500gms B) @ £22.00 per kg
- 2kg kit (1kg A / 1kg B) @ £18.00 per kg
- 10kg kit (5kg A / 5kg B) @ £16.00 per kg
- 36.28kg (80lb) kit (18.14kg Part A / 18.14kg Part B) @ £15.50 per kg
-
Prosthetic Silicones P656 A/B (50:50 MIX) STANDARD AND QUICK CURE SYTEMS
A 1: 1 platinum catalysed system shore A hardness ‘9’, translucent designed to be used in special effects. Additives can be introduced to decrease hardness and/or create tactile adhesion.- 1kg kit (500gms A / 500gms B) @ £22.00 per kg
- 2kg kit (1kg A / 1kg B) @ £18.00 per kg
- 10kg kit (5kg A / 5kg B) @ £16.00 per kg
- 36.28kg (80lb) kit (18.14kg Part A / 18.14kg Part B) @ £15.50 per kg
-
Blue Protective FG – Coloured corrosion protection
Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations.
Colored corrosion protection of moulds during storage.Blue Protective FG Blue oil film. Avoids the need to clean during the first moulding operations. Can be used in cosmetic, pharmaceutical and food industries.
NSF Approved H2 N°140207. -
Sansil DM7 -Paintable mould release agent
SANSIL DM 7 is a specialist mould release agent based on a unique, active material that has been formulated to provide improved release characteristics (compared to conventional non-silicone release agents) on a wide range of thermoplastic and thermoset materials, whilst still allowing post moulding operations to be carried out.
-
Sansil SF 772 PA – Mould release agent for plastics. Silicone free. Colourless film. Temperature resistance up to 200 °C.
-
Sansil Ecoprotect – Corrosion protection of moulds during storage.
Sansil Ecoprotect provides corrosion protection of moulds during storage. Transparent wax film. With Sansil Ecoprotect it avoids the need to clean during the first moulding operations.
-
Sansil AB – Cleaner for injection mould tools
Sansil AB is a Cleaner for injection mould tools. The Sansil AB Product can be used hot or cold. Allow to act for a few minutes depending on soil nature to remove.
-
R20 – Paintable mould release agent
R20 – Paintable mould release agent for plastics and rubbers allowing post-finishing operations. R20 is suitable for plastics and rubbers to be painted, lithographed, bonded, thermo welded after moulding. Colourless film.
R20 mould release agent is temperature resistance up to 150°C.
-
Robsil Luborsil – Mould release agent
Robsil Luborsil Mould release agent for plastics and rubbers.
Based on silicone oil. Colourless film.
Temperature resistance up to 220 °C.. -
Power Stick high strength
Power Stick is a permanent, high strength multipurpose adhesive. Non chlorinated. Long open time for convenient positioning.
Power stick High strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. Power Stick will provide high-strength bonds in many different areas : chipboard and concrete, insulation materials, leather, paper, wood, metal, plastic and rubber.
Directions: Apply Power Stick on both sides, allow solvents to evaporate for some minutes, then press parts together.
-
Silicone Spray Lubricates and protects.
Silicone Spray Lubricates and protects. using thin clear protective film which resists wide temperature ranges (from -40°C to +200°C).
High quality lubricant for fitting of parts of different materials. Odorless and long lasting. Non-conductive.Directions: Spray Silicone Spray generously on surfaces to be treated. Repeat application at regular intervals, depending on environmental circumstances.
-
Penetrating Oil + MoS2 Lubricates and frees seized and rusted metal parts (bolts, screws). Reduces wear; facilitates future dismantling.
- Penetrating Oil + MoS2 Frees and lubricates seized mechanisms.
- Penetrating Oil + MoS2 quickly penetrates through oxides and soil.
- Penetrating Oil + MoS2 Attacks rust and corrosion.Penetrating Oil Frees seized and rusted bolts, nuts and other metal components. Leaves a lubricating MoS2 film.
Directions: Spray Penetrating Oil liberally and wait a few minutes to allow the liquid to penetrate. Repeat if necessary.
-
Precision Cleaner 300 ML– Removes grease, oil, dust. Leaves no residue. Compatible with most current materials.
Precision Cleaner can be used on plastics, test before application. May dissolve certainPrecision Cleaner Removes grease, oil, dust. Leaves no residue. Compatible with most current materials. For use on plastics, test before application. May dissolve certain adhesives.
-
Quickleen – Solvent cleaner for service and repair is Fast and powerful cleaner.
- Quickleen Cleans and degreases all metal parts,
- Quickleen Cleans and degreases machines and tools.
- Quickleen Removes grease, oil and dirt.
Quickleen cleans and degreases all metal parts. Is aFast and powerful cleaner. Removes oil, brake fluid, grease, dirt and stains. Without chlorinated solvents.
Directions: Spray Quickleen liberally and allow to run off. Air dry or wipe off. If necessary, repeat application. Do not use Quickleen on plastics without prior testing.
-
Aerosol 5-56 from CRC Industries,
- Aerosol 5-56 Penetrates –
- Aerosol 5-56 Displaces moisture –
- Aerosol 5-56 Lubricates –
- Aerosol 5-56 Protects
Aerosol 5-56 is a Multipurpose service spray.
Loosens rusted parts. Displaces moisture, enables to start wet engines, prevents electrical failure. Lubricates, stops squeaks and squeals, frees sticking mechanisms. Protects metals against humidity, corrosive atmosphere and prevents rust. -
Rost Flash – Rust loosener with freeze shock -Freezes and cracks rust!
1. Rust layer on a bolt.
2.When sprayed, the rust cools down (-40°C) and cracks, leaving small fissures.
3. Penetration of the active liquids.
4. Blocked parts are separated easily. Rost Flash loosens all kind of threaded parts, hinges and sliding parts.Rost Flash Free of silicones and acids.
Directions: Remove dirt, shake the can and Rost Flash spray liberally from a short distance.Allow the product to penetrate. Repeat action after 2 min. if needed.
-
Copper Paste – High temperature lubrication. Protects against fretting, seizing and corrosion.
Copper paste is a Copper based anti-seize lubricant & protector.
Easy assembly and disassembly of all parts exposed to temperatures up to 1000 °C. Protects against burning in, corrosion and seizing. Prevents and stops disc brake noise and vibration.Directions: Use Copper Paste only on a clean and dry substrate. Do not mix with other lubricants.
-
MM 730 Food grade Moulding Silicone
MM 730 Food grade Moulding Silicone & MM 720 Food grade Moulding Silicone
MM730FG – is a pourable 2-part addition cure silicone elastomer system. The system will cure at ambient temperatures within 24 hours, but the rate of cure can be accelerated by heat. The cured rubber exhibits excellent physical and electrical properties: Applications: Moulding chocolate & Cake decorations
Key Features:
FDA CFR 177.2600 compliant for fatty and aqueous foods
EC 1935/2004 and EU10/2011 compliant
Very low shrinkage
High dimensional stability
Easily degassed
Food Approvals MM730FG -YesPack sizes supplied :
- 5.5 kg kits – £511.81 each
- 22 kg kits – Please contact us for Price
MM 730 Shore A (FG) Silicone
MM 720 Shore A (FG) Silicone