- No products in the basket.
J Foam 4087 A/B
£84.00 ex Vat
J Foam 4087 A/B — Soft — Medium density (flexible) that will form a good skin under pressure, again to make light weight castings. (Natural colour)
- 8 kg
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
Product Description
J Foam 4087 A/B — Soft — Medium density (flexible) that will form a good skin under pressure, again to make light weight castings. (Natural colour)
Packaging — 8 kg kits.
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.
Additional Information
| Weight | 8 kg |
|---|
Related Products
-
Details
Flexil RTV 5C base with either STD Green or FAST Yellow catalyst.
5C is a two part silicone elastomer which cures at RT to a flexible 5 shore A material.RTV 5C is offered with 5% catalyst
Supplied as- 1.05 kg £28.00 each
- 5.25 kg £82.75 each
- 21 kg kits ( £POA)
-
Details
J Foam 520W A/B — High density (rigid) foam suitable for the production of Prototypes and Models. Forms a good skin under pressure. (Natural colour) Packaging
- 10 kg
- 40 kg
Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
Polyurethane foam systems — (J Foam range)
Two-part liquid Urethane Foam system, when mixed together the product expands and set to form structural foam flexible or rigid. Ideal for the manufacture of lightweight props and parts.Note: A full range of Polyurethane pigments are available, along with mould release agents for different types of moulds. For more advice please contact our technical department.
-
Details
J-Cast 70D is a two part quick curing polyurethane casting system curing at room temperature to a rigid tough material.
- Quick Curing
- 50 : 50 mixing
- Low viscosity
- Low shrinkage
- Precise reproduction
Applications Specially developed for use in silicone rubber mouldings. For the rapid production of models and prototypes.
